Civil Engineering Equipment

Being a client centric organization, we are involved in manufacturing and supplying a wide assortment of Auto Level Set. Our devices are widely preferred by various numbers of clients owing to its precise designs, high durability, robustness and longer service life. Rough and tough to use our devices are manufactured from optimum quality components and in accordance with international industrial standards.

Features:

• Durable
• Light weight
• Fine polish

Sturdy load frame with chrome plated piston for rust free operation

Available in models :

• 1000kN capacity, hand operated, with one pressure gauge
• 1000kN capacity, motorized, with one pressure gauge
• 1000kN capacity, motorized, with digital display
• 2000kN capacity, hand operated, with one pressure gauge
• 2000kN capacity, motorized, with one pressure gauge
• 2000kN capacity, motorized, with three pressure gauges
• 2000kN capacity, motorized, with digital display
• 3000kN capacity, motorized, with three pressure gauges
• 3000kN capacity, motorized, with digital display

We are enggaged in fabricating compressing testing machines which are known for its effective functioning among our valued clients .

The apparatus consists of a cast aluminum base with an iron stand on which moves aluminum arm. A 15cm dial is fixed on this arm and a brass rod slides through the lower portion of the arm. A needle with weight is fitted to this rod. The dial is graduated from0-400 in one tenth millimeter sub division. Supplied complete with adjustable needle holder, penetration needle, sample container, transfer dish and weights – 50gm & 100gm.                 

Available in models

• Hand operated
• Automatic, with digital timer

Product Details:

Concrete Mixer Laboratory Type electrically operated. Designed to remove the burden some work of hand mixing. Uniform thoroughly mixed batches can be produced. The counter balanced drum is easily to tilt 1 ½ to 2 Cu.Ft.mix. The total drum volume is however 3 Cu.ft. Mounted on a sturdy rubber typed stand, the drum is mounted for end discharge and equipped with end towing pole. Equipped with 1 H.P. electric motor, suitable for operation on 220 volts, single phase 50 cycles A.C.supply.

We supply air entrainment meter which is effeciently used in construction business and in laboratories .

We are engaged in fabricating aggregate crushing equipment which is known for its effective functioning amoung our valued client . The equipment offers  a relative measure of the aggregate to crushing under gradually applied compressive load and is fabricated in accordance with IS : 2386 (part iv) . It has following optional accessories :

• Metal measure
• Tamping rod

Below mentioned are its specifications :

• Three sizes 75mm dia for 1/8 to 1/4
• Size aggregate  , 150mm dia for 3/8 to 3/4
• Size aggregate (standard)
• 300mm dia for 1a to 2a size aggregate
• IS : 2386 (part iv)

We supply highly efficient ductility testing machine which is electrically operated and includes the moving carriage moving over the lead screw .

We offer bitumen extractor which is highly appriciated for its simple configuration and user friendly operation .

We provide buovancy balance which helps widely in determining the specific gravity and for the water absorption of the aggregate .

We are fabricating in marshall stability apparatus which is known for its effective functioning among our valued clients .

Los Angeles Abrasion Testing Machine is used for determining the resistance to wear of small size coarse aggregates and crushed rock. The abrasion testing machine consists of a Closed hollow cylindrical steel drum rotating around its horizontal axis on ball bearing units mounted on a sturdy base framework at a speed of between 30-33 rpm. Supplied complete with subtracting revolution counter to preset the number of revolutions, a sample collection tray for removal of the sample on completion of testing and set of 12 abrasive charges.The los Angeles Abrasion testing machine is fitted with 1 HP Motor. Suitable for Operation on 440V, Three Phase, 50Hz, AC Supply.

We are instrumental in offering a compact arcade of Lab Concrete Mixer. This range of mixer is extensively used in the construction industry for mixing of the cement and other related ingredients. Thus, our range is suitable for usage owing to its smooth operations that provides quick applications. Manufactured in tandem with industry laid norms and standards, this range is rigorously examined as per industry laid parameters to deliver a flawless range.

A concrete mixer is the equipment that combines cement, aggregate such as sand and water to form the concrete .

 

Some features are:

 

• Rigid construction

• Least maintenance

• Optimum performance

• Longer service life

 

Specification of Mixer : 

• Powder Coated

• Standard 0.5HP ISI electric motor

• 3 cube foot drum capacity

• Cast iron drum

• Drum rotation – 20.22 ( Smooth & very low noise )

• Mixing Capacity : 2 cubit foot approximately

• Drum type body

• Twin shaft frced mixing

• Capacity:2000L

 

Centrifuge Extractor  is used for determination and checking of Bitumen percentage in Bituminous mix, the mix is added with a solvent and
dissolved bitumen is removed by centrifugal action. Consists of a removable Aluminum rotor bowl, Capacity 1500 gms. With a cap
and tightening nut. The bowl assembly is mounted on a vertical shaft, which protrudes from a cast housing. This shaft and thus the
bowl is rotated fast manually by enclosed gears in the cast body and handle. Solvent is introduced during the test through the holes in the cap of the housing. A drain is provided to collect dissolved Bitumen coming out of the rotating bowl and getting collected in the
housing.

We have emerged as a widely recognized manufacturer and supplier of aggregate impact apparatus .

We offer highly efficient elongation and flekiness index , which helps in determining the elongation index of the aggregate .

As Per IS: 4031, 5516, 1727 & 4828, ASTM C-204, BS: 4359 Part II.

The Blaine's Air Permeability Apparatus is used for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement. This is a variable flow type air Permeameter. Specifications: The apparatus consists one each of permeability cell 12.5cm I.D., Manometer 'U' type mounted on stand with a built in a stop cock, Perforated disc, Plunger Rubber stopper,Rubber tube 30cm long. Spares and accessories: Packet of 12 filter paper discs. Non-perforated disc. Suction bulb.

We fabricate highly efficient softening point for determination of softening of the bituminous material .

We are engagged in fabricating benkleman beam appratus which is known for its effectual functioning amoung our valued client .

Being a prominent name of the industry, we are engaged in manufacturing, supplying and wholesaling a durable range ofGauging Trowelto our esteemed patrons.Offered range is extensively used in agricultural and construction sectors to pick sand and other gravel. In addition to this, our range is manufactured by making use of optimum grade raw material that is further quality tested by our team of quality controllers who make sure to test the whole lot before its dispatch at the patrons end.

 

Applications

 

• Plants

• Heavy metal industries

• Agricultural sectors

 

Some features are

 

• Low maintenance

• Resistance against corrosion

• Compact designs

• Light weight

 

We deals in Analytical Balances.

Features:

• Accuracy: Fully automatic internal adjustment (FACT)
• Brilliant backlit display: Correct reading of results under any light condition.
• Robust quality: Full metal housing.
• Mono Bloc weighing technology: Including permanent shock and overload protection.
• Easy operation: Large, ergonomic touch-sensitive keys

Specification:

• Maximum Capacity : 510 g
• Readability : 0.001 g
• Repeatability : 0.001 g
• Linearity : ± 0.002 g
• Settling time (typical) : 3 s
• Adjustment with internal weights : FACT
• Adjustment with external weights : 500 g
• Sensitivity temperature drift : 6 ppm/°C
• Interfaces : RS232C
• Size of weighing pan : ø 100 mm
• Free height above weighing pan : 165 mm
• Dimensions : 245x321x236 mm (WxDxH

High pressure permeability test can be conducted on different size of specimens using different cells. Cell is provided with a top plate and funnel at the bottom having gasket seals held in position through bolts & nuts. The concrete specimens are sealed in the cell to prevent any leakage along the side walls. Each unit is provided with chamber pressure gauge of 0-20kg/cm² and test pressure gauge of 0-15kg/cm². Pressure are applied using any available pressure line at the site or  compressor. Supplied without glass bottles & compressor.    

The various models are -

·         Single Cell Model for specimen size 150mm cube           

·         Three Cell Model for specimen size 150mm cube             

·         Single Cell Model for Specimen Size 100mm dia x 100mm high     

·         Three Cell Model for Specimen Size 100mm dia x 100mm high     

·         Single Cell Model for Specimen Size 150mm dia x 150mm high     

·         Three Cell Model for Specimen Size 150mm dia x 150mm high

 

The laboratory jaw Crusher is designed for fast crushing of Aggregates, Ores, Minerals, Coal, Coke, Chemicals and other similar
materials. It is compact and of rugged construction for general laboratory of small pilot plant operations. Two jaws of manganese steel are provided in this laboratory jaw Crusher. The moveable jaw produces tow blows for every revolution, thus reducing over sizing to a minimum. A combination of forward and downward strokes with a rocking action exerts pressure on the coarser material, yet permits the finished material to pass through the jaws. A hopper is provided at the top for feeding material The smooth jaws ensure a uniform product and easy cleaning is possible.

• Jaw Size: 100x150,
• Feed Size: 25 To 30,
• Discharge Size: 6mm To 15mm
• 1lhr. 250k9,
• Motor, 3hp,3ph

Clients can avail from us a sophisticated assortment of Vicat Needle Apparatus, which is manufactured by the optimum grade raw material that is obtained from the authorized vendors of the industry. Ideally used in various industries and sectors, this apparatus sets the needle in shape. In addition to this, our team of experienced members work in accordance to the industry standards to achieve a respectable position for the industry.

 

( Relevant Standard IS : 2645 )

 

Specifications:

• Material: steel

• Consistency plunger 10 mm diameter

• Initial/final needle 1.13 mm diameter

• Longer service life

• Lightweight

• Compact designs

• Pointer set to perfect zero

• Powder coated

• Smooth Operation / Accurate Work

   

Levering upon our technologically-advanced production facility, we offer a supreme grade variety of Vicat Apparatus. Under the strict guidance of our experts, this product is manufactured using quality assured raw material & cutting edge technology in tandem with predefined guidelines of quality. In order to offer a flawless range to our esteemed clients, we stringently check entire range in line with industry standards.

As per IS:2386 (Part IV). The sturdy construction consists of a base and support columns to form a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of hammer during test. Supplied complete with a cylindrical cup, a metal measure 75 mm inner dia x 50 mm deep and a tamping rod. The apparatus is fitted with a blow counter.

Features:

• Rigid structure
• Impeccable finish
• Durability