Civil Lab Equipment

Product Details:

Sturdy load frame with chrome plated piston for rust free operation

Available in models :

• 1000kN capacity, hand operated, with one pressure gauge
• 1000kN capacity, motorized, with one pressure gauge
• 1000kN capacity, motorized, with digital display
• 2000kN capacity, hand operated, with one pressure gauge
• 2000kN capacity, motorized, with one pressure gauge
• 2000kN capacity, motorized, with three pressure gauges
• 2000kN capacity, motorized, with digital display
• 3000kN capacity, motorized, with three pressure gauges
• 3000kN capacity, motorized, with digital display

Additional Information:

• Production Capacity: 5

Product Details:

World-Proven Precision and Durability SOKKIA B Series automatic levels feature enhanced reliability under all environmental conditions. Tough and compact bodies are more tightly sealed against water, humidity and dust. The B series levels provide quick setup, easy sighting, and superior durability against vibration and shock, ensuring the increased productivity over an extra-long period of time. The B series Sokkia Auto levels incorporate the most precise and reliable compensator available in the market today. The optimally designed telescope provides exceptionally bright and sharp view that reduces operator’s eye strain. Quick collimation and horizontal angle measurement combine for fast and easy aiming of layout and alignment tasks. The market- and time-proven B series automatic levels provide outstanding precision for a multitude of leveling tasks.

Additional Information:

• Production Capacity: 5
• Delivery Time: Ready Stock

Product Details:

ISI INTERLOCKING LAB complete set 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: ready stock

Product Details:

Concrete Mixer Laboratory Type electrically operated. Designed to remove the burden some work of hand mixing. Uniform thoroughly mixed batches can be produced. The counter balanced drum is easily to tilt 1 ½ to 2 Cu.Ft.mix. The total drum volume is however 3 Cu.ft. Mounted on a sturdy rubber typed stand, the drum is mounted for end discharge and equipped with end towing pole. Equipped with 1 H.P. electric motor, suitable for operation on 220 volts, single phase 50 cycles A.C.supply.

Product Details:

We offer bitumen extractor which is highly appriciated for its simple configuration and user friendly operation .

Additional Information:

• Production Capacity: 10

Product Details:

Prism Mould Three gang (40.1x40x160mm)

It is supplied complete with base. All parts are marked with thei dentification number for correct assembly. Each mould is individually verified in the dimensional tolerances, hardness, squareness, flatness & roughness. 

Additional Information:

• Production Capacity: 10
• Delivery Time: ready stock

Product Details:

Our immaculate range of Sieve Shaker is highly demanded in the market by our eminent customers. These Shakers are designed using excellent metal, which provides exceptional durability level with long lasting feature. Clients can avail in in various sizes, designs and shapes as per need with proper customization. Our experts design these trainers in complete adherence to the international standards so that we successfully meet the expectations of our patrons.

 

 

Two types of sieve shaker available with us:

 

Hand operated : This sieve shaker is convenient for bench mounting . It can takes upto 7 sieves operated by hand wheel .

Size avilable for Hand operated sieve shaker :

• 8” Diameter

• 12” Diameter

 

Gyratory Sieve shaker apparatus : This apparatus carries upto 7 sieves and driven by 0.25 hp electric motor through a reduction gear immersed in oil . There is an upward & downward movement ensuring that each square cm of the sieve is utilised . This is suitable for operation 230 V single phase A.C. supply .

 

Size avilable for Gyratory Sieve shaker :

 

• 8 “ Diameter

• 12” Diameter

• 18 “ Diameter

 

Features:

 

• High durability and efficient workout
• Clear finish with customized designs
• Smooth working
• High speed and Clean Flow
• Very Long Service life
• Noiseless Work
• Heavy Super quality motor
• Superb Smooth Handle
• Compact Rolling Wheels

Additional Information:

• Production Capacity: 10

Product Details:

This is used for determination of resistance to wear for Cement & Concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed face-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose. The machine consists of a disc rotating at a speed of 30 R.P.M. in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 Kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A Pre-set Counter automatically stops the machine after 22 revolutions.This counter is Re-adjustable. The machine works on 440 V A.C. Three Phase electrical supply. On Request machine to operate on 230 V A.C. Supply can also be supplied.

Additional Information:

• Production Capacity: 10
• Delivery Time: ready stock

Product Details:

Relative Density Test

Relative Density Test

The equipment is used for the determination of the relative density of cohesion less free draining soils and meets the essential requirements.

Specification :
The equipment consists one each of: Vibratory table, with a cushioned steel vibrating decks about 75cm x 75cm. It has a frequency of approximately 3600 vibratory table, minute under a 11.5kg load. Amplitude is variable in between 0.65mm in step of 0.05 to 0.25mm, 0.25 to 0.45 mm and 0.45 to 0.65mm. Suitable for operations on 415V, Three Phase supply. Cylindrical metal unit weight mould, 3000ml. Capacity.Guide sleeve with clamp assembly. Surcharges base plate for mould. Handle for surcharge base plate. Surcharge weight. The total weight together with surcharge base plate and handle is equipment to 140 kg. /sq. cm. For mould. Cylindrical metal unit weight mould 15000 ml. capacity. (Total weight together with the above mould & surcharge weight is equivalent to 140 kg./sq. cm) dial gauge 0.01mm x 50mm travel. Extension piece 25mm for dial gauge.

Additional Information:

• Production Capacity: 5

Product Details:

Being a client centric organization, we are involved in manufacturing and supplying a wide assortment of Auto Level Set. Our devices are widely preferred by various numbers of clients owing to its precise designs, high durability, robustness and longer service life. Rough and tough to use our devices are manufactured from optimum quality components and in accordance with international industrial standards.

Features:

• Durable
• Light weight
• Fine polish

Product Details:

Our firm specializes in offering a wide array of Vibrating Machine. The offered vibrating machine is inspected by our quality analyst on diverse parameters so as to supply defect free range to customers. As well, our vibrating machine is used for to impart greater vibrating of lesser amplitude to the mould. Our vibrating machine can be purchased at nominal rates within the committed time - frame.

Features:

• High efficiency
• Robust construction
• Longer functional life

Specifications:

• Power optional: 1000w
• 150 kg loading
• Stone crusher special material
• Wear resistance
• Low pollution

Additional Information:

• Production Capacity: 10

Product Details:

This curing tank has been designed to accommodate 150mm / 70.6mm cube moulds and upto 36/72 cube mould can be cured in one go. The tank is fully insulated, comes complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allows free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The tank is heated by an immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 35° C or 100° C ± 2° C / 27° C +2° C,expect for the 15 minutes after immersion of the freshly made specimens.

Curing Tank for 6/12 moulds of 150 mm / 70.6 mm size
Curing Tank for 12/24 moulds of 150 mm / 70.6 mm size
Curing Tank for 24/48 moulds of 150 mm / 70.6 mm size
Curing Tank for 36/72 moulds of 150 mm / 70.6 mm size

Additional Information:

• Item Code: RLE-601
• Delivery Time: 7 Days

Product Details:

For The Determination of Resistance of Aggregates to Wear by Abrasion.

Specification :
It consists of two hollow cylinders closed at one end and provided with Fitting covers at the either end. These cylinders are mounted an a shaft 0 at angle of 30 with the axis of rotation of the shaft. The shaft rotates at 30-33 RPM. Through a reduction gear operated by a motor and is provided with a revolution counter. Complete with Abrasive Charge consisting of 12 Nos. Hardened steel Balls of 48mm dia. Suitable for operation on 440 Volts, Three Phase, 50 Cycles, A.C. supply.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Production Capacity: 5

Product Details:

We are one of the leading organizations engaged in manufacturing, supplying and wholesaling GI Sieves. All these sieves are manufactured under the guidance of experienced professionals, following industry laid norms and standards. At the manufacturing stages, these sieves are supervised by our experts, so as to maintain higher standards of quality. Suitable for sieving chemical powders, medical powders, aggregate, cement, sand, soil and other similar products.

 

Specification:

 

• Mesh: 1 to 635 mesh

• Aperture : 2.36-0.02 mm

• Diameter 5-100 cm

• Sieve height: 4 cm, 5 cm, 8 cm and 10 cm

 

Some of the features of the sieves offered by us are mentioned as follows:

• Wear resistance

• Easy to use

• Used for particle analysis in chemical industry, milling, metallurgy and building

Additional Information:

• Production Capacity: 10

Product Details:

Compression Testing Machine
Capacity: 200 Ton (2000 Kn)
Capacity: 100 Ton (1000 Kn)
Model: Digital
Type: Channel Based
Loading Unit: - The hydraulic jack of is fixed to the
base. The upper platen has got a self-aligning action
and is attached to a screw, which passes thru the cross-
head plate, and can be raised or lowered for initial
clearance adjustment. The lower platen rests on the
jackram and is positioned with the help of a centering
pin. Loading is accomplished by the upward movement
of the lower platen.
Pumping Unit :- The motorized pumping unit, which
is housed in an elegant console is of double plunger
type and is driven by a single phase 220/440 Volts 50
cycles electric motor. The pumping unit is a separate
unit connected to the jack by means of a Rubber Hose
Pipe. A junction box is suitable fixed to connect the
motor to the mains thru a push button starter.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 2
• Delivery Time: ready stock

Product Details:

We offer highly efficient elongation and flekiness index , which helps in determining the elongation index of the aggregate .

Additional Information:

• Production Capacity: 5

Product Details:

sting Machine. Automation Grade: Manual. Specification :The instrument consists of a circular base with two vertical guides. The hammer of weight 13.75 ±0.25 kg can be raised to fall freely down.

Additional Information:

• Production Capacity: 10
• Delivery Time: 1 - 5 days

Product Details:

Shrinkage Bar Mould It is made of mild steel or brass. Faces Size machined flat. Complete with base plate and stainless steel smooth reference points.

Additional Information:

• Production Capacity: 10
• Delivery Time: 1 - 2 days

Product Details:

Specification : Aggregates which are flaky and/or elongated will often lower the work ability of a concrete mix and may also affect long term durability. In bituminous mixtures, flaky aggregates make for a harsh mix and may also crack and break up during compacting by rolling. The flakiness of aggregate is determined by measuring the thickness of individual particles. Hence we offer thickness gauge and length gauge to check flakiness and
elongation index of the aggregate respectively.

Flakiness Gauge: Used for Determination of flakiness index of coarse aggregate  It consists of a steel frame with a sliding panel having slots of different dimensions

 Elongation Gauge: Used for determination of elongation index of aggregates. It consists of a steel frame having slots of different dimensions. The frame is fixed on a hard wooden base. 

Additional Information:

• Item Code: RLE-AG-001
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/A

Product Details:

Laboratory Vane Shear (Motorised)

Consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotation of the vane is by means of a hand wheel which operates a worm gear arrangement turning the upper end of a calibration torsion spring, vane dia, rod dia, vane size & vane height are as per IS specifications. The vane shaft is attached through the hollow upper shaft to a resettable pointer, which indicates the angle indicates the angle of torque on a dial graduated in degree the dial reading multiplied by spring factor gives the torque a container for soil sample is also supplied & a sampling tube of 38mm. i.d. & 150mm long can also be used as container . Supplied with set of four springs, one each of approx. 2 kgs/cm sq., 4kgs/cm sq., 6 kgs/cm sq. & 8kgs/cm sq. complete as above in a wooden carrying case. Electrically operated rate of rotating is 1/60 R.P.M. Suitable for operation on 230 V A.C. Single Phase.

Additional Information:

• Production Capacity: 10

Product Details:

Gang Mould (Three Gang) 

 Moulding of 40mm, 50mm, 100mm specimens. Manufactured from Mild Steel / Cast Iron / Bronze and supplied complete with base plate

Additional Information:

• Production Capacity: 10

Product Details:

As per IS:1237, 654. This is a double lever loading machine and the load is applied by flow of lead metal which automatically stops when the sample breaks. The sample is mounted between rollers 40mm or 12mm dia. Bearing rollers can be placed at centre distances of 150, 200 or 270mm. Complete with 20 Kg lead metal.

Additional Information:

• Production Capacity: 10

Product Details:

 Consolidation Apparatus (Single Gang) 

Consolidation test is un-dimentional test considered extremely important in soil mechanics. Sample taken from adjacent areas of a single site show differential settlement even when tested using same techniques. Soil of similar strength may show varying consolidation. Samples are very carefully prepared and vertical settlement of the specimen in saturated or drained conditions carefully recorded when known load is applied.

SPECIFICATION:
The standard outfit comprises of the following items. Loading unit, maximum capacity 20kg/cm.sq. Having a loading yoke connected to a lever arm with a counter balancing adjustment and having a lever ratio of 1:1 the whole assembly being mounted on a sturdy steel frame stand. The loading unit is so designed that it can be used for consolidation cells of different diameters as well as different dia floating ring type consolidation cells. Fixed ring type Consolidometer (Odeometer) cell assembly for testing 60mm dia x 20mm thick specimen comprising: Fixed ring for specimens 60mm dia x 20mm thick with guide ring. Top and bottom porous stones for 60mm dia specimen. Perforated pressure pad, Channeled base with water inlet and gasket Flanged water jacket, water reservoir with plastic tube and pinch cock. Set of weights to give a pressure of 10kg/cm.sq. On 60mm dia specimen, comprising : 7 nos. 0.05 kg/cm .sq., 5nos. 0.1 kg/sq.cm., 6nos. 0.5kg/sq. cm., and 5 nos. 1.0 kg/sq.cm. Supplied complete as above but without dial gauge. 

ACCESSORIES :
Dial gauge 0.002 mm x 10mm. Extension piece, 40 mm long, consolidation test forms pad of 50 for one dimensional consolidation. 

OPTIONAL EXTRAS : 
Varying head stand pipe, 50cms. Long with mm. Scale. Fixed ring type of Consolidometer (Odeometer) cell assembly for 50mm. dia x 20mm thick specimens , complete with fixed ring guide ring. Pair of porous stones, perforated pressure pad, channeled base, gasket and flanged water jacket. Set of weights to give a pressure of 10kg/sq.cm. on 50cm. dia specimen. Fixed ring type of Consolidometer (Odeometer) cell assembly for 70mm dia x 20mm thick specimens, complete with accessories as above.Set of weights to give a pressure of 10 kg/sq.cm. on 70mm dia specimens. Fixed ring type of consolidometer (odeometer) cell assembly for 100mm dia x 25mm thick specimens, complete with accessories as above. Set of weights to give a pressure of 10 kg/sq.cm. on 100mm. Dia specimens.

Additional Information:

• Production Capacity: 5

Product Details:

This is a brass tube approximately 53cm long and 2.8cm I.D. with a wooden handle. Total length approximately 73cm. The tube has the sharp angular edge which conveniently pierces cement bags. An air hole of approximately 3mm dia is drilled on the tube near handle. Total sample collected at one time is 300 cm approximately.

Additional Information:

• Production Capacity: 20

Product Details:

Centrifuge Extractor  is used for determination and checking of Bitumen percentage in Bituminous mix, the mix is added with a solvent and
dissolved bitumen is removed by centrifugal action. Consists of a removable Aluminum rotor bowl, Capacity 1500 gms. With a cap
and tightening nut. The bowl assembly is mounted on a vertical shaft, which protrudes from a cast housing. This shaft and thus the
bowl is rotated fast manually by enclosed gears in the cast body and handle. Solvent is introduced during the test through the holes in the cap of the housing. A drain is provided to collect dissolved Bitumen coming out of the rotating bowl and getting collected in the
housing.

Additional Information:

• Production Capacity: 15

Product Details:

Additional Information:

• Production Capacity: 10 - 15
• Delivery Time: ready stock